The pickup that redefined the Texas blues sound.

*****************************

****************************

**************************

This is the pickup that redefined the Texas blues sound. 

Texas Specials boast plenty of midrange chirp, crystal highs and tight vass, along with increased output. Construction of Texas Specials are overwound, calibrated, vintage style Stratocaster pickups which feature Alnico 5 magnets and enamel coated magnet wire. The middle pickup is reverse wound/reverse polarity for hum canceling in positions 2 and 4. Bridge: DC Resistance: 6.7K, Inductance: 3.58 Henries. Middle DC Resistance 6.5K, Inductance: 2.6 Henries. Neck: DC Resistance 6.2K, Inductance: 2.4 Henries. Set of 3.

Check 'em out here:

Guitar Parts Depot

The Floyd Rose Tremelo - Part 3

The Floyd Rose Tremelo - Part 3

Black Original Floyd Rose - With Fine Tuners

Black units were first used around the 1983 timeframe on the Pacer Carerra and Pacer Imperial. The black Floyd was also first used on the 1983-1984 early Barettas with the non-angled headstock. Generally, the black trems hold up pretty well under abuse. The gold Floyd's (not shown here) are one of the worst when it comes to pitting and rust. The black Original Floyd Rose also features the hardened steel fulcrum points.Some OFR units have more thin baseplates that other models, and are not very common.

The Floyd Rose II - With Fine Tuners

The II units were used on some of the later model overseas Strikers, Focus, 100, and 1000 series Kramers While these trems are not necessarily "crap", they are not as good as the original since they are cast iron. They rust much easier, and the fulcrum points are metal inserts as opposed to being hardened and part of the actual trem metal itself. If you see a Kramer with one of these, it is NOT an American Series. Additionally, if you try to use one of these on a guitar that originally had an OFR on it, you'll have some bad action because the base plate is thicker than the OFR's. Also worth of noting, a Floyd Rose III exists that is actually a non-locking trem made in Asia that Kramer wanted as an affordable piece. It is slightly different to the Floyd II, with the III featuring a different base plate.

The Floyd Rose Pro

The Pro units were installed on later model Kramers. Most notably, they can be seen on Nightswan II's, Pro-Axe guitars, and some Showsters. They differ from the standard units in that the inntonation allen screws are in front of the fine tuners as opposed to the OFR which has them behind the whale tail. Also, the "whale tail" is at an angle versus its OFR relative making the trem a lower profile for players who rest their hands on the unit while playing. The spring block that extends down into the body is shorter as well, keeping the block at the right depth for recessed routed trems. Generally, they work the same, and stay in tune under the most rigorous "whammy" conditions. They cannot be used on traditional OFR "non recessed" routes.

The Les Paul Floyd Rose

The LP units were created by Floyd and Kramer to be installed on Les Paul guitars with little to no modification. However, the literature didn't state that the neck would have to be modified in order to install the locking nut. These are very rare, and are occasionally seen on ebay for sale.

Click Here and let our wonderful staff assist you in your need for reliable Guitar Parts.

The Floyd Rose Tremolo - Part 1

The Floyd Rose Tremolo - Part 1

Floyd Rose is the organization that licenses, distributes and manufactures the Floyd Rose Locking Tremolo invented by Floyd D. Rose. Made by Schaller in Germany, the Floyd Rose tremolos are some of the best, if not the best tremolo offered on guitars back in the 80's. Even today, most "metal" guitarists will agree there is no better locking tremolo on the market than these trems. Floyd and Kramer (a young guitarist/machinist), worked together to develop and distribute this unit. In fact, Kramer was the sole distributor of Floyd Rose trems in the 80's, even ones that were sold individually (not on guitars).

The Floyd Rose Tremolo is a full (floating¦ tremolo, pivoting on two large screws in the face of the guitar body, that allow upward movement as well as downward. It was best well known for its ability to stay in tune even after the most demanding of abuse. The Floyd Rose tremolo, contrary to popular belief, does not require the cutting of the ball¦ at the end of the string. However, it is held into place by six, vice-like clamping assemblies, one within each of the saddles. You can string the Floyd by placing the ball ends into the Tuner on the headstock as a "stop" and place the other end of the string in the base unit, then wind. Its fine tuners also have much better access since they are on the top of the unit, just past where the hand would rest on the tremolo for the muted effect.


The History of the Floyd Rose

Picture a freezing Reno, NV, practice room in the dead of winter, and a Hendrix-loving, whammy bar-crazed guitarist whose '57 strat just won't stay in tune. "This has got to stop," he says to himself disgustedly, and shlumps home determined to solve his problem once and for all. "I started at the E string" recalls Floyd Rose, inventor of the locking tremolo system, "and noticed that friction at the nut prevented the string from returning to pitch. My thought was that the string shouldn't move at all. So I glued it! This worked, but of course it wouldn't be practical for very long. But since I was making jewelry at the time and had lapidary tools, I got some brass and whitled a nut with clamps that held two strings each. With that, the instrument almost returned to tune, so I figured the bridge end was causing the rest of the problem."

Although tougher to solve, the hitch was the same-how to reduce the friction caused by metal-to-metal contact? Suspending the bridge in midair was impossible, so Floyd tried drilling two inverted cones into the underside of the bridge block and balancing it on two sharpened pivot points. This was an improvement but adjusting the height of the strings now became too difficult. The third and most workable choice was to use a fulcrum system, where the whole bridge assembly balanced on a single knife-edge and rocked back and forth with an action similar to a Jazz master’s "floating" bridge.


Rose drew up a patent design using a Les Paul, modifying its Bigsby tremolo with parts cast at the foundry where he worked. For his third prototype, though, he wanted machined parts and was shocked when a shop wanted $600 for the job. "I was so broke my parents had to pay," he admits sheepishly. "It worked really well for about 15 minutes, until the knife-edge went dull. I realized then that I needed to experiment with tougher materials, so I started studying metallurgy; and, after watching Mr. $600 work I decided to improve my shop skills too."

STAY TUNED FOR PART 2

Please check out GuitarPartsDepot.com’s selection of Floyd Rose Tremolo Systems.

If you have any questions, please feel free to give us a call so we can show you our excellent service first-hand. Toll Free: 866-631-4473